fascias.com

High quality isophalic polyester top coat, mid grey colour (RAL7045), specially manufactured to provide a durable weather proof finish to the GRP layer. Isophalic formula, cures tack free, water resistant and UV stable.

Top coat has thixotropic properties and will resist draining away even on inclined surfaces.

Suitable for a variety of applications such as roofing and garden ponds.

Manufactured to colour RAL7045. If using more that one tin check colour and mix together if necessary before use. More...

Catalyst (MEKP)
All resin and top coat products require catalyst to cure from a liquid into a solid. Catalyst is normally added at 1% to 4%

Accelerator
All our resins and top coats are supplied with cobalt accelerator already added. Small amounts of accelerator (i.e. approximately 0.5 percent) can be added to pre accelerated products to speed up the cure time. Always mix the accelerator thoroughly into the resin BEFORE the catalyst

Wax solution
The addition of wax solution (at approximately 2 percent) effectively turns gel coat into top coat. The wax eliminates the surface tackiness of gel coats and resins when required as a final coating. Top coats have the wax already added and should only normally be used as the final coat.

Styrene
Used to thin resin and top coat. Resin already contains approximately 35% styrene. For thinning do not use more than 10% addition as this will degrade the resin.

Chopped strand mat (CSM)

Our Lloyds approved CSM has been carefully selected for its consistent quality and is suitable for a wide range of applications. We stock 450 gram and 600 gram weight. This product is approximately 1 metre wide, emulsion bound and cut on one edge. We recommend reading the safety data sheets before using this product

This product is factory made to the highest quality and is suitable for flat roofing, cladding, domestic and industrial applications. Features include.

Unique high adhesion finish that gives an excellent bond to most liquid applied and single ply systems.
Consistent weight and thickness.
High strength and flexibility.
Easy jointing.
U. V. Stable.
Pre pigmented.

Fibre Glass Application Tools

Super strong patent rollers designed by the glass fibre roofing company for the application of polyester resins and gels. Features include:

A practically unbreakable 6 mm steel frame. The cloth is sewn on so that it does not fall off even after repeated use. All head fittings are recessed for getting into corners when moulding. Finished with a strong plastic handle which will accept an extension pole. The only roller to withstand permanent immersion in acetone and resin