fascias.com

Description:

3 metre 40 mm plastic waste pipe white

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

3m x 40mm

Description:

40 mm Swept 92.5 degree plastic waste pipe bend - White

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

40mm 92.5 deg

Description:

40 mm Knuckle 90 degree plastic bend - White

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

40mm

Description:

40 mm plastic Coupling - White

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

40mm

Description:

40 mm Plastic Tee - White

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

40mm

Description:

40 mm Plastic Socket Plug - White

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

40mm

Description:

40 mm Plastic bracket -White

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

40mm

Description:

40 mm Boss Adapter - Flexible

Rubber Adaptors for use with boss pipes and access branch. Allows connection of 40mm waste pipe into the 110mm soil stack system.

Dimensions:

40mm

Description:

40 mm Flexible Connector ( Cut to suit, do not solvent weld) 350 mm Length

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

40mm x 350mm Cut to length

Description:

40 mm Universal Tank Connector Suitable for BS5254 and BS5255

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

40mm

Description:

40 mm Plastic Swept 135 degree bend - White

Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipes (excluding solvent weld waste). An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.

Dimensions:

40mm 135 deg

Telephone Orders

We are happy to take your order or enquiry by phone

Please call us on 0117 971 9922

We are open 8am - 6pm Monday to Friday & Saturdays 8am - 12pm

© Copyright 1994-2012, Master Plastics (SW) Ltd Bristol | Clevedon. All rights reserved world-wide.

Many of the images on this site do not belong to us. Do not copy or link directly to them. Contact us so we can seek permission where necessary on your behalf.

WE DELIVER UK NATIONWIDE ENGLAND SCOTLAND WALES AND IRELAND..