tamworth_canopy_header
The Tamworth Over Door Canopy

A quick to install, effective covered canopy.
The realistic clay-type tiles mounted onto timber
brackets (BRW 3 inc.) are economical to use. Minimum maintenance to framework is required.
Available in sizes 1250mm 1410mm and 1800mm maximum length.Please note the brackets supplied with this canopy are pse painted or stained timber.

Dimensions

!

The Tamworth

!

A quick to install, effective covered canopy.
The realistic clay-type tiles mounted onto timber
brackets (BRW 3 inc.) are economical to use.

Minimum maintenance to framework is required.

Available in sizes 1250mm 1410mm and 1800mm maximum length.Please note the brackets supplied with this canopy are pse painted or stained timber.

 

 

 

 

Door Canopy Delivery

!

Many of the GRP door canopies on this site are made to order allow 21 days or delivery.

Please note you must check you canopy for damage before signing for it delivery notes signed unchecked will count as undamaged. All canopy deliveries are insured until you sign for them.

In the event you find damage please mark the delivery note received damaged.

 Our Prices Include VAT

Fitting instructions for Tamworth overdoor canopies

!

Fitting instructions for Tamworth overdoor canopies


Brackets
1. Position brackets at each side of door opening, ensuring that they are level and at the correct distance apart.
2. Drill a hole at the bottom of the bracket just under where the 2 pieces meet.
3. Drill a second hole near the top of the bracket.
4. Position bracket and mark wall for drilling. Drill & plug hole in wall.
5. Fasten brackets to wall using screws and cover caps provided.
6. Trim cross piece to length and fit to brackets by drilling & screwing.


Top section
1. On the simulated lead flashing upstand, mark holes at 400mm centres, starting 50mm from each end, Drill through upstand.
2. Slide top section onto brackets, and mark holes on wall. Lift down top section.
3. Drill & plug holes in wall, fit top section and fasten with screws and caps.
4. Run a bead of clear silicone along the top of the lead effect flashing to prevent water ingress.
5. Wash down your Tamworth canopy with warm soapy water.
Your canopy will give years of maintenance free service, and will require only an occasional wash with warm soapy water.
NB Do not use abrasive or solvent cleaners on this canopy. Doing so will invalidate warranty.

!

Telephone Orders

We are happy to take your order or enquiry by phone

Please call us on 0117 971 9922

We are open 8am - 6pm Monday to Friday & Saturdays 8am - 12pm

© Copyright 1994-2012, Master Plastics (SW) Ltd Bristol | Clevedon. All rights reserved world-wide.

Many of the images on this site do not belong to us. Do not copy or link directly to them. Contact us so we can seek permission where necessary on your behalf.

WE DELIVER UK NATIONWIDE ENGLAND SCOTLAND WALES AND IRELAND..