Warwick Door Canopy
A versatile door canopy that can be manufactured to any length up to 3000mm. Supplied with a smooth white under tray with a lead look top fitted over, this is easy and quick to install.
Available in white or brown.
Includes GRP corbels (BRG8)
Standard Overall Widths : 1500mm & 1800mm
(can be made in any width up to 3.6metres)
All canopies come with a fitting kit and instructions.
Standard Fitting Instructions for Over door Canopies
-
Mark out and pre-drill 6mm holes at approx 300mm centres along the canopy flanges (some canopies may have a tray and lid assembly).
-
Offer canopy up to the wall and centralise it above the door opening. Mark off the position on the wall for the bracket assembly (if brackets are to be fitted). Make sure you markings are straight and level.
-
Offer the bracket up to the wall at each side of the door opening. Drill and plug the wall using a 7mm masonry drill bit. Screw the bracket to the wall using 3" screws and plugs supplied.
-
Lift the canopy onto the brackets and centralise over the door opening. Drill and plug the wall as before, this time using 2"screws and plugs supplied.
-
Cover all visible screw heads with the appropriate coloured screw caps.
-
Clean canopy using soap and water or a non-abrasive cleaner.
-
Seal canopy to the wall using and appropriate colour sealer. (Sealer is not supplied).
-
Your over door canopy is maintenance-free, however we recommend regular cleaning with soap and water to maintain it's good looks for many years to come.
Overall Widths : 1500mm & 1800mm (can be made in any width up to 3.6metres)